(Translated from original language) ENGLISH
56 Espresso Coffee MachineCompass MB by fiamma
9. Alarms and Troubleshooting
Whenever the symbol appears on the display, you need to check the machine’s settings and
functions. On display C, press symbol in order to access the troubleshooting menu.
Display C
9.1. Time-Out (Automatical Stop) during boiler filling
When display shows…
This alarm indicates that the preset time for the boiler filling up has been exceeded. In this case, all
main functions of the machine are automatically blocked.
All keys on the keyboards start to blink.
In order to exit the alarm mode, you need to switch off the machine and switch it on again.
… if shows …
… it means the Min. Level of Steam boiler is disconnected.
9.2. Temperature probe in short-circuit/ overheating (AL1)
In case a temperature probe suffers a short-circuit or overheating, all keys start to blink. The electronic
unit blocks all keyboards and main functions of the machine. The display shows:
In case a probe in a coffee water boiler malfunctions, the display shows the following message,
indicating the probe in question:
To Next Page
Loading...
Need help?
General
