Torque Patterns
After 25 miles (40 km), check the lug nut/bolt torque to
be sure that all the lug nuts/bolts are properly seated
against the wheel.
WARNING!
To avoid the risk of forcing the vehicle off the jack,
do not tighten the lug nuts/bolts fully until the vehicle
has been lowered. Failure to follow this warning may
result in personal injury.
FLUID CAPACITIES
Systems U.S. Metric
EDM (Electronic Drive Module) 0.18 US gal 0.67 Liters
Cooling system 1.72 US gal 6.5 Liters
Hydraulic brake circuit 1.76 lb 0.8 kg
Windshield and rear window washer fluid reservoir 0.40 US gal 1.5 Litres
DRIVE TRANSMISSION FLUIDS AND LUBRICANTS
Component Fluid, Lubricant, or Genuine Part
Drive Transmission Greases
We recommend using Mopar® Molybdenum disulphide grease, for use at high temperatures. N.L.G.I. consistency 1-2. Specifica-
tion: 9.55580-GRAS II.
We recommend using Mopar® Low friction coefficient grease for constant velocity joints. N.L.G.I. consistency 0-1. Specification:
9.55580-GRAS II.
Drive Transmission Lubricant We recommend using Mopar® SAE 75W-70, API GL-4. Specification: 9.55550-MZ14.
Drive Transmission Coolant
We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km) Formula OAT (Organic Additive Technology)
meeting the requirements of the manufacturer Material Standard MS.90032.
206 TECHNICAL SPECIFICATIONS
To Next Page
Loading...
