NOTE:
● It is not necessary to move the temperature settings
for cold or hot vehicles. The system automatically
adjusts the temperature, mode, and blower speed to
provide comfort as quickly as possible.
● The temperature can be displayed in U.S. or
Metric units by selecting the US/Metric customer-
programmable feature.
To provide you with maximum comfort in the Automatic
mode during cold start-ups, the blower fan remains on
low until the vehicle warms up. The blower increases in
speed and transition into Auto mode.
Manual Operation Override
This system offers a full complement of manual
override features. The AUTO symbol in the front ATC
display will be turned off when the system is being used
in the manual mode.
NOTE:
When in manual override mode, the system will not
automatically sense the presence of fog, mist or ice
on the windshield. Defrost mode must be manually
selected to clear the windshield and side glass.
CLIMATE VOICE COMMANDS
Adjust vehicle temperatures hands-free and keep
everyone comfortable while you keep moving ahead.
Push the VR button on the steering wheel. After the
beep, say one of the following commands:
● “Set the temperature to 70 degrees”
Did You Know: V
oice Command for Climate may only be
used to adjust the interior temperature of your vehicle.
Voice Command will not work to adjust the heated
seats if equipped.
SCHEDULED CABIN CONDITIONING (SCC)
This feature allows the driver to pre-condition (warm up
or cool down) the passenger cabin based on a planned
departure time. Also, all scheduled cabin conditioning
will be powered by the vehicle’s high voltage battery
working in conjunction with any EVSE connected to the
vehicle.
In order to conserve the vehicle’s high voltage battery
power, the driver can choose between allowing the
battery to be drained of power down to <1%, or to
stop the SCC when the high voltage battery has been
depleted to 25% State Of Charge (SOC). The battery
percentages are displayed in the instrument cluster
display.
A maximum of three independent schedule event
timers are available for use by the SCC feature and
Scheduled Charging feature for charging the high
voltage battery. The timers may be used in any
combination for SCC and Scheduled Charging, but only
three total timers are available.
The SCC event times are used to wake up the vehicle
so that the Climate Control system can condition the
passenger cabin prior to the scheduled departure
time. Based on vehicle operating conditions, ambient
temperature, and the next programmed departure time,
the vehicle will determine when to begin cabin
conditioning. Cabin conditioning can begin up to
30 minutes prior to the scheduled departure
time,provided the stated high voltage battery conditions
are met.
The SCC will continue for a maximum of 15 minutes
after the scheduled departure time.
Once a scheduled event has been created, it can be
applied to one or more days of the week. The scheduled
event can also be set to occur only during the current
week, or repeat every week until the feature is turned
off or the event is changed.
All of the following conditions must be met before the
vehicle will initiate a scheduled SCC event:
● Gear selector in PARK
● Doors Closed
● Hood Closed
● Liftgate Closed
● Hazard switch off
● 12 Volt battery at an acceptable charge level
● Key fob not located inside the vehicle
● Ignition in the OFF position
Scheduling An SCC Event:
1. Select the Electric Vehicle App under the Vehicle
menu.
46 GETTING T
O KNOW YOUR VEHICLE
To Next Page
Loading...
