voltage battery. To access this App, press the Apps
or Vehicle button on the main menu bar of the
radio’s touchscreen, and locate the Electric Vehicle
App. Accessing the app brings you to a set of three
pages: Power Flow, Schedules, and Charge Setting.
Electric Vehicle App Location
Power Flow
The Power Flow screen shows the current power
readings for all of the following:
● Motor - Shows the amount of power (in kW) the high
voltage battery is currently providing/absorbing.
● Climate - Shows the amount of power (in kW) the
Climate Control system is using to maintain the
current interior temperature.
Power Flow paths are indicated by the direction of the
arrows on the touchscreen.
Power Flow Screen
Driving Hist
or
y
The Driving Hist
or
y screen sho
ws the miles (km) driv
en
in F
ull Electric kWh (batt
er
y powered) mode for both
the previous week and the current week. The data is
displayed in a bar graph: Electric mode in teal.
Driving History Screen
Charging Schedule
T
o set a charging schedule, select the Electric Vehicle
App in the touchscreen and follow these steps:
1.
Select “Schedules”.
Schedules Screen
2. Select the schedule to be set (1, 2, or 3) by
pressing the appropriate arro
w on the right side
of the screen.
3. Select what time Scheduled Charging should start
and stop charging or select “Charge Until Full”. If
“Charge Until Full” is selected a stop charging time
cannot be selected.
4. Set the Charge Start Time: Hours, Minutes, and
AM/PM.
NOTE:
This is to occur every week (as long as the vehicle
is connected to an EVSE).
Set Charge Schedule
GETTING TO KNOW YOUR VEHICLE 23
2
ELECTRIC VEHICLE APP
Within the Uconnect system is the Electric Vehicle
App that allows you to see y
our vehicle’s power flow
and set a charging schedule for your vehicle’s high
To Next Page
Loading...
