ACC Hill Example
LANE CHANGING
ACC may not detect a v
ehicle until it is completely in
the lane in which you are traveling. In the following
lane changing example, ACC has not yet detected the
vehicle changing lanes and it may not detect the vehicle
until it's too late for the ACC system to take action.
ACC may not detect a vehicle until it is completely in
the lane. There may not be sufficient distance to the
lane-changing vehicle. Always be attentive and ready to
apply the brakes if necessary.
Lane Changing Example
NARROW VEHICLES
Some narrow vehicles tra
veling near the outer edges of
the lane or edging into the lane are not detected until
they have moved fully into the lane. There may not be
sufficient distance to the vehicle ahead.
Narrow Vehicle Example
STATIONARY OBJECTS AND VEHICLES
ACC does not react to stationary objects or vehicles.
F
or example, ACC will not react in situations where
the vehicle you are following exits your lane and the
vehicle ahead is stopped in your lane. It will consider
this stopped vehicle a stationary object as it did not
previously detect movement from it. Always be attentive
and ready to apply the brakes if necessary.
Stationary Object And Stationary Vehicle Example
OBJECTS AND VEHICLES MOVING IN
OPPOSITE OR PERPENDICULAR DIRECTION
The system cannot detect objects or v
ehicles traveling
in the opposite or perpendicular direction, and
therefore will not activate.
86 S
TARTING AND OPERATING
To Next Page
Loading...
