102 Nero 603 83 540 Connect DOBLO GB
102
CONNECT Nav
When new route is calculated, the
display will show the new distance and
the time necessary to reach the desti-
nation fig. 139.
Using the knob 22-fig. 1 or pressing
“ESC” 23-fig. 1 the user can accept or
reject the new route.
If there is no alternative route, then
the display shows “NO ALTERNA-
TIVE ROUTE AVAILABLE” fig. 140.
fig. 140
F0D2116g
fig. 141
F0D2117g
fig. 139
F0D2115g
SET ROUTE
“SET ROUTE” allows to define the
route calculation parameters.
Selecting this function rotating the
knob 22-fig. 1 and pressing it to con-
firm, the display shows the following
options fig. 141:
– “INFO”: to display current route
setting.
– “ROUTE TYPE”: to set the route
calculation criteria according to
“SHORTEST TIME” or “SHORTEST
DISTANCE”.
– “MOTORWAY”: to define if route
can include highway segments (“YES”)
or (“NO”).
– “ZOOM INTERSECTION”: en-
ables (“YES”) or disables (“NO”) the
zoom intersection option, i.e. whether
to zoom the map when vehicle ap-
proaches an intersection.
The screen shows:
– map with streets only
– vertical bar with distance to inter-
section; each segment corresponds to
50 metres.
– pictogram showing next turn (in-
cluding distance to turn).
– “OK”: to activate settings.
To select the required function, ro-
tate the knob 22-fig. 1 and then press
it to confirm.
To Next Page
Loading...
