107 Nero 603 83 540 Connect DOBLO GB
CONNECT Nav
107
Selecting and confirming INFO by
turning and pressing the knob 22-
fig. 1, the display will show the pre-
viously set units fig. 146.
Select and confirm DISTANCE
UNITS with the knob 22-fig. 1 to
change the distance unit (km or mi)
fig. 147; select the required unit, then
select OK and press the knob to con-
firm.
TRIP: SPEED
This function shall be used to set the
speed limit. If this limit is exceeded the
driver is warn by a dedicated message
on the display.
Selecting SPEED with the knob 22-
fig. 1 and pressing it to confirm will
display the following menu fig. 148:
– INFO
– CHANGE.
fig. 146
F0D2178g
fig. 147
F0D2179g
fig. 148
F0D2171g
To Next Page
Loading...
