97 Nero 603 83 540 Connect DOBLO GB
97
CONNECT Nav
“DESTINATION”: allows the use of
the point as already described.
“DELETE”: deletes entry.
“CHANGE”: changes the string
(Name) associated to the point and en-
ables to record/change/delete the as-
sociated voice sample fig. 123 - 124.
RDS-TMC
Select this function by rotating the
knob 22-fig. 1 and then press it to
confirm.
“RDS-TMC” option allows the user
to select a geographical point to get re-
lated RDS-TMC information. RDS-
TMC events include: queue, accidents,
generic dangers, works in progress,
closed road/narrow road/no entry
road/slippery road, ice/snow, fog, wind,
procession, danger of explosions, slow
down, traffic sings out of order, park-
ing, forecast. A TMC event cannot be
used to identify a destination.
RDS-TMC events are classified into
the following three categories:
A Traffic: information on traffic and
road conditions.
B Weather: information on weather
conditions.
C Info: information on general inter-
est issues.
When RDS-TMC function is on
fig. 125, the system will detect events
near the vehicle or near the specified
address.
To choose one of these two options,
select “NEAR CAR” or “NEAR AD-
DRESS” with the knob 22-fig. 1 and
then press it to confirm.
fig. 125
F0D2101g
fig. 124
F0D2100g
fig. 123
F0D2099g
To Next Page
Loading...
