EasyManua.ls Logo

Fiat Idea - Starting the Engine

Fiat Idea
210 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
112
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
ALPHABETICAL
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
STARTING
AND DRIVING
STARTING THE ENGINE
The car is provided with an electronic en-
gine lock device: refer to “The Fiat CO-
DE system” paragraph in “Dashboard and
controls” if you cannot start the engine.
The engine may be noisier during the fir-
st seconds of operation, particularly after
a long period of inactivity. This is charac-
teristic of hydraulic tappets, the timing sy-
stem chosen for petrol engine versions to
reduce the number of servicing interven-
tions and does effects neither functiona-
lity nor reliability.
STARTING PROCEDURE FOR
PETROL VERSIONS
Proceed as follows:
apply the handbrake;
put the gear lever into neutral;
press the clutch pedal all the way
down without touching the accelera-
tor;
turn the ignition key to AVV and let
it go the moment the engine starts.
It is dangerous to run the en-
gine in closed environments.
The engine consumes oxygen and en-
gine exhaust contains carbon dioxi-
de, carbon oxide and other toxic gas-
ses.
WARNING
If the engine does not start at the first at-
tempt, return the ignition key to STOP
before repeating starting.
If, when the ignition key is at MAR, the in-
strument panel warning light
Y
remains
lit together with warning light U turn the
key to STOP and then back to MAR; if
the warning light remains on, try with the
other keys provided with the car.
If you still cannot start the engine, use the
emergency procedure (see “Emergency
starting” in the “In an emergency” chap-
ter) and go to a Fiat Dealership.
IMPORTANT Never leave the ignition key
to MAR when the engine is off.
PROCEDURE FOR MULTIJET
VERSIONS
Proceed as follows:
apply the handbrake;
put the gear lever into neutral;
turn the ignition key to MAR; instru-
ment panel warning lights
m
,
U and
Y
will light up;
Wait for the warning lights
Y
and
m
to turn off. The hotter the engi-
ne is, the quicker this will happen;
press the clutch pedal all the way
down without touching the accelera-
tor;
It is advisable not to demand
maximum performance from
your car (e.g. excessive acce-
lerations, long distances at
top rpm, excessive intense braking,
etc.) as soon as the engine is started.
Do not leave the key in the
ignition switch in the MAR
position with the engine off to
avoid unnecessary consump-
tion of electricity which could drain the
battery.

Table of Contents

Related product manuals