Fiat Idea - Replacing Exterior Bulbs

147
STARTING
AND DRIVING
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
ALPHABETICAL
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
REPLACING EXTERIOR
BULBS
For the type of bulb and power rating, see
“When needing to change a bulb”.
FRONT LIGHT CLUSTER
The front light clusters contain side lights,
dipped beam, main beam and direction in-
dicator bulbs.
To replace side lights, dipped beam, di-
rection indicators and fog light, remove
the lid A-fig. 18 by releasing the retainer
B.
fig. 18
F0H0179m
fig. 19
F0H0180m
The bulbs are arranged inside the light clu-
ster fig. 19 as follows:
G: Direction indicators
F: main-beam headlights
E: side light
D: fog light
C: Low beams
After replacement, refit the covers cor-
rectly, ensuring that they are locked in pla-
ce.
MAIN BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒ turn the bulb holder anticlockwise A-
fig. 20 and pull it out;
❒ disconnect the electric connector B-
fig. 21;
❒ release the bulb holder clip C-fig. 21;
❒ remove the bulb D-fig. 21 and repla-
ce it;
❒ refit the clip C-fig. 21, connect the
electric connector B and insert the
cap A-fig. 20 turning it anticlockwise.
Arrange the opening vent H-fig. 20 of
the cap from the top downwards.