Fiat Idea - REPLACING FUSES

152
STARTING
AND DRIVING
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
ALPHABETICAL
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
REPLACING AN
INTERIOR BULB
For the type of bulb and power rating, see
“When needing to change a bulb”.
FRONT CEILING LIGHT
fig. 32-33
To change the bulbs, proceed as follows:
❒ operate in the points shown by the ar-
rows and remove light A;
❒ open the protection lid B;
❒ replace bulbs C releasing them from
the side contacts; make sure that new
bulbs are correctly clamped between
contacts;
❒ close the lid B and secure light A in-
to its housing locking it properly.
BOOT LIGHT (where provided)
fig. 34-35
To change the bulbs, proceed as follows:
❒ operate in the points shown by the ar-
rows and remove light D;
❒ open the protection lid E;
❒ change the bulb F releasing it from the
side contacts and making sure the new
bulb is correctly fastened between the
contacts;
❒ close the protection lid E and secure
light D into its housing locking it pro-
perly.
fig. 32
F0H0193m
fig. 33
F0H0194m
fig. 34
F0H0195m
BOOT LIGHT
fig. 36
To change the bulb, proceed as follows:
❒ open the tailgate;
❒ remove the light A levering in the
point shown by the arrow.
❒ open the protection B and replace
the snap-fitted bulb;