Fiat Idea - Page 152

151
STARTING
AND DRIVING
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
ALPHABETICAL
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
The tail lights will resume normal opera-
tion when the burnt bulb is replaced.
The bulbs are arranged inside the light unit
as follows:
D: side lights/brake lights;
E: Direction indicators
F: reverse
G: rear fog lights
fig. 29
F0H0189m
fig. 30
F0H0190m
THIRD BRAKE LIGHTS
To replace the bulbs proceed as follows:
❒ open the tailgate;
❒ undo both fastening bolts A-
fig. 30:
❒ press the retainer tab B and remove
the bulb holder;
❒ remove the snap-fitted bulbs and re-
place them;
❒ put the bulb holder back in the unit
and make sure that the retainer tab
B is fastened; fasten the two screws
A.
IMPORTANT The entire light cluster mu-
st be replaced in versions with shaded
windows because the unit is sealed.
REGISTRATION PLATE LIGHTS
To change the bulbs, proceed as follows:
❒ apply pressure to the point shown by
the arrow and remove lens A-fig. 31;
❒ change the bulb B releasing it from the
side contacts and making sure the new
bulb is correctly fastened between the
contacts;
❒ withdraw the transparent cover as-
sembly.
fig. 31
F0H0192m