Fiat Idea - Page 151

150
STARTING
AND DRIVING
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
ALPHABETICAL
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
fig. 27
F0H0187m
fig. 28
F0H0188m
REAR LIGHT CLUSTERS
To change the bulb proceed as follows:
❒ open the tailgate;
❒ turn the fastening device A-fig. 27 an-
ticlockwise (left flap) or clockwise (ri-
ght flap) and remove the cover;
❒ disconnect the electric connector C-
fig. 28;
❒ loosen the two fastening nuts B;
❒ to remove the light cluster, pull per-
pendicularly using the handle present
on the light cluster body;
❒ press the bulb fastening tabs and ex-
tract the bulb;
❒ extract the bulbs D - E - F - G
fig. 29 by pushing them slightly and
turning them anticlockwise;
❒ insert the bulb holder, making sure
that the two tabs are correctly faste-
ned; insert the light cluster inside the
housing and connect the electric con-
nector C-fig. 28; fasten the two nuts
B;fasten the cover making sure that
the tabs are inserted in the seat and
turn the fastening device A-fig. 27 an-
ticlockwise (left flap) or clockwise (ri-
ght flap) to secure it.
If a fault is detected with one of the tailli-
ght bulbs (burnt bulb), the brake lights will
be operated in dimmed manner to tem-
porarily ensure tail lights functions.