94
STARTING
AND DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
ALPHABETICAL
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
SEAT BELTS
USING THE FRONT
AND SIDE REAR
SEAT BELTS
The belt should be worn keeping the che-
st straight and rested against the seat back.
To fasten the seat belts, take hold the ton-
gue A-fig. 1 and insert it into the buckle
B, until hearing the locking click.
At removal, if it jams, let it rewind for a
short stretch, then pull it out again without
jerking.
Press button C-fig. 1 to release the belt.
Accompany the belt while it is being
rewound to prevent twisting.
Through the reel, the belt automatically
adapts to the body of the passenger wea-
ring it, allowing freedom of movement.
The reel may lock when the car is parked
on a steep slope: this is perfectly normal.
Furthermore, the reel mechanism locks
the belt if it is pulled and in the event of
sudden braking, collisions and on high
speed bends.
The rear seat is fitted with inertial seat
belts with three anchor points and reel.
Rear seat belts must be worn as shown
in diagram D-fig. 2 (five seat versions) or
as shown in diagram E-fig. 3 (four seat
versions).
fig. 1
F0H0126m
fig. 2
F0H0309m
fig. 3
F0H0348m
Never press button C-fig. 1
when travelling.
WARNING
S.B.R. system
The car is fitted with a Seat Belt Remin-
der system (S.B.R.), consisting of a buz-
zer and a flashing warning light
<
on the
instrument panel which warns the driver
that the seat belt must be fastened.
To Next Page
Loading...
