119
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
ALPHABETICAL
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
STARTING
AND DRIVING
F0H0151m
ASSEMBLY DIAGRAM fig. 4
The tow hook structure must be fastened
in the points shown by the symbol
Ø
using
a total of 4 M10 screws, 2 M10 screws and
2 M12 screws.
The hook should be fastened to the body
avoiding any type of drilling and trimming
of the rear bumpers that remains visible
when the hook is removed.
IMPORTANT It is compulsory to fasten a
label (plainly visible) of suitable size and
material with the following wording:
MAX LOAD ON BALL 60 kg
After fitting, the bolt holes
must be sealed to prevent
exhaust gas leaks.
WARNING
fig. 4
Existing holes
Standard ball
Existing holes
loaded
Existing holes
To Next Page
Loading...
