Fiat Idea - Page 31

30
SAFETY
STARTING
AND DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
ALPHABETICAL
INDEX
DASHBOARD
AND CONTROLS
Adjusting the failure/warning
buzzer volume
(Buzzer Volume)
This function allows the volume of the
buzzer which accompanies the display of
failures / warnings to be adjusted (8 lev-
els). To set the desired volume, proceed
as follows:
– briefly press button MODE: the previ-
ously set volume “level” starts flashing on
the display;
– press button + or – to set;
– briefly press button MODE to go back
to the menu screen or press the button
for a prolonged time to go back to the
standard screen without storing the set-
tings.
Selecting the language
The messages may be displayed in the fol-
lowing languages: Italian, German, English,
Spanish, French, Portuguese.
To set the required language proceed as
follows:
– briefly press button MODE: the previ-
ously set “language” starts flashing on the
display;
– press button + or – for setting;
– briefly press button MODE to go back
to the menu screen or press the button
for a prolonged time to go back to the
standard screen without storing the set-
tings.
“Temperature” unit of measure
This function is used to set the unit of
measure for distance (°C or °F)
Proceed as follows to set the required
unit:
– briefly press MODE: (°C) or (°F) will
start blinking on the display (according to
the previous setting);
– press button + or – for setting;
– briefly press button MODE to go back
to the menu screen or press the button
for a prolonged time to go back to the
standard screen without storing the set-
tings.