3 - 9
BIOS Setup
AGP & P2P Bridge Control
AGP Aperture Size
It allows you to select the main memory frame size for AGP use.
The options are: 256M, 128M, 64M, 32M, 16M, 8M, 4M.
AGP Fast Write
This feature allows you to set AGP fast write mode.
The options are: Disabled, Enabled.
CPU & PCI Bus Control
PCI1/2 Master 0 WS Write
When enabled, allows a zero-wait-state-cycle delay when the PCI1/2 mas-
ter drive writes data to DRAM. The options are: Enabled, Disabled.
PCI1/2 Post Write
When enabled, allows the CPU to PCI1/2 master drive excutes post write.
The options are: Enabled, Disabled.
AGP Master 1 WS Write
When enabled, the AGP bus master write access to DRAMs will add one
wait-state cycle. The options are: Enabled, Disabled.
AGP Master 1 WS Read
When enabled, the AGP bus master read access to the DRAMs will add one
wait-state cycle. The options are: Disabled, Enabled.
AGP Mode
This feature allows users to select the AGP mode when an AGP add-on
card installed. The options are: 4X, 2X, 1X.
AGP Driving Control / AGP Driving Value
These two features allow user to improve the performance of AGP card
manually by pressing Page Down/Page UP key if necessary.
The options of AGP Driving Control are: Auto, Manual.
To Next Page
