[FUNC] or [UNIT]. Then press [M+] to confirm and save,
e. This instrument displays Line 2 and the last variant or command
stored,
f. Repeat steps d and e for other lines,
g. (In case, number of lines to be printed is less than 15 lines) To finish
editing, select command End, then pres [M+] to confirm.
h. This instrument returns to and displays the current internal function
number,
i. If required, repeat steps a to h to create and edit custom printout
format for other functions.
NOTE: -
1. Disregarding the total number of lines, the last line must be = End.
2. This instrument will automatically add End on line number 15th for
Weighing, Piece Count and Percentage function, and on line
number 10
th
for animal weighing function.
8.2.2 Print Output Format Variants Table
To Next Page
Loading...
