Fidelity Electronics DM-3000 - Page 48

B. Information Request Commands (F18 = Mode 4)
Operation data are available by sending information request commands to
this instruction.
CAUTION: -
1. Do not retrieve any data of non-current working mode. This will
retrieve wrong data of non-current working mode.
2. Retrieve only data when the same working mode is in operation.
This will retrieve wrong data of non-current working mode.
B.B.1 Information Request Commands Table
Commands
51
Operation Data
Working
Mode
52
Data
Length
J
Current status, weight and tare
weight values
All
24
K
Date of printing
All
10
L
Time of print
All
8
M
No. of accumulated transaction
Normal
Weighing
7
N
Total accumulated weight
(when accumulation function is in
effect)
Normal
Weighing
9
O
Net weight
All
10
P
Tare weight
All
10
Q
Gross weight
All
10
R
HI limit
Note C
Note A
S
LO limit
Note C
Note A
51
Commands must be in capital letter.
52
"All" means that information is good for all working modes.