Fidelity Electronics DM-3000 - Page 49

T
53
Comparison Result
All
Note B
U
Number of piece
Counting
10
V
Average piece weight
Counting
9
W
Reference mass (100%)
Percentag
e
9
X
Percentage value
Percentag
e
10
Y
Weight Hold (Animal weighing)
Animal
Weighing
9
Note A: - 10 for counting mode; 9 for all other modes.
Note B: - 6 for ACCEPT; 11 digits for BELOW LIMIT and ABOVE LIMIT
Note C: -Good for all except animal weighing mode.
B.B.2 Data format
54
,
55
,
56
Protocol of data answered by this instrument is illustrated on below table.
Commands
Data example and format Description
J
ST, NT 123.567,123.567,kg
➢ 2 digits motion status (ST = stable; US = unstable)
➢ 1 digit comma separation
➢ 2 digits Net/Gross (NT = Net; GS =Gross)
➢ 1 comma separation
➢ 1 digit sign. Positive = space. Negative = minus (-)
➢ 7 digits weight value including decimal point. If there is
no decimal point, then the first character = space
➢ 1 digit comma separation
➢ 7 digits tare weight including decimal point
➢ 1 digit comma separation
➢ 2 digits weight unit
53
Does not support animal weighing function.
54
all data = align to right.
55
insignificant figures = space
56
all data end up with CR, LF