1
1-20 Installing User Software on a Windows Computer
Installing the PostScript or PCL printer driver
for Windows NT 4.0
The following procedures describe the installation of a local printer. Adding a printer
to a local system requires that you log in to your local Windows NT 4.0 computer
(not the network server domain) and that you are a member of the Administrators
group. The procedure for adding a network printer is similar to adding a port. See
“Completing the Windows NT 4.0 TCP/IP and LPR connection” on page 1-29.
TO INSTALL THE POSTSCRIPT OR PCL PRINTER DRIVER
FOR WINDOWS NT 4.0
1. If you are installing from the User Software CD, insert it into the CD-ROM drive.
2. Click Start, choose Settings, and then choose Printers.
3. Double-click Add Printer.
4. To install a printer locally, select My Computer and click Next.
My Computer is available if you logged in to a computer on which you have
Administrator privileges. If it is not available, you can add a network printer.
The procedure is similar to adding a port (see page 1-29).
To Next Page
Loading...
