SETUP OPTION REFERENCE 34
Copier Mode Gradation, Resolution Specify the default screen to print jobs.
Convert Paper Sizes No
, Letter/11x17->A4/A3,
A4/A3->Letter/11x17
Converts paper sizes in documents automatically to the default paper
sizes specified. For example, if you select Letter/11x17->A4/A3, a letter
size document is automatically printed on A4 paper.
This option works in conjunction with the Default Paper Sizes option.
For example, if Convert Paper Sizes is set to Letter/11
x17->A4/A3, and
Default Paper Sizes is set to US, jobs are printed A4/A3 size. This also
includes E100 system pages such as the Start Page, Test Page, and Job
Log.
Default Orientation Portrait, Landscape This PCL option determines whether the text or image will be oriented
along the short edge of the paper (portrait) or along the long edge of
the paper (landscape).
Default Paper Sizes US, Metric (default is US in
the United States, Metric
elsewhere)
Prints on US paper sizes (for example, Letter, Legal, 11
x17), or Metric
paper sizes (for example, A4 or A3) by default. When no page size is
defined within a PostScript file, jobs are printed on Letter paper if you
select US; A4 paper if you select Metric.
Font Number 0-999 The font number designates the default font for the E100. To
determine font numbers, print the internal PCL Font List. The
standard fonts are listed in order. The font numbers, however, are not
displayed.
Font Pitch (char/in) 0.44-99.99 (default is 10.00) If the default PCL font selected in Font Number represents a fixed
pitch scalable font, determine the width of scalable type. Pitch is
measured by characters per inch, so 10-pitch type fits ten characters per
inch.
Font Size (pt) 4.0-999.75 (default is 12.00) If the default PCL font selected in Font Number represents a
proportionally spaced scalable font, determine the point size (height) of
the font.
Font Source Internal
, Soft Font Specify the PCL font source to be enabled.
Form Length (lines) 5-128 (default is 60) This option sets the number of lines to be printed per page in PCL
jobs.
Offset Jobs On, Off
Specify whether jobs are offset after they are printed. You must install a
finisher.
Paper Size for System Pages US, Metric (default is US in
the United States, Metric
elsewhere)
Specify the paper size that PCL system pages print on. System pages are
pages that you print from the copier touch panel, such as the PCL Font
List.
Print Cover Page No
, Before Job, After Job,
Before and After
Prints a cover page (job summary) with the name of the user who
sent the job, document name, server name, time the job was printed,
number of pages printed, and status of the job.
Option Settings
(default is underlined)
Description
To Next Page
