ADMINISTERING THE FIERY CONTROLLER 45
Direct Mobile Printing
Direct Mobile Printing enables direct wireless printing to the E100 from supported mobile
devices. Supported mobile devices must be connected to the same wireless network subnet as
the E100 to print using Direct Mobile Printing.
E100 Setup for Direct Mobile Printing
Before using Direct Mobile Printing, configure the following settings in Configure:
• Server > Jobs:
Enable Printed Queue: Selected
• Network > Protocol > TCP/IP > Security:
Specify ports to enable or Enable Port Filtering: Selected
Available Ports > 5353 (Multicast DNS): Selected
• Network > Services > Web:
Enable IPP: Selected
• Network > Services > Bonjour:
Enable Bonjour: Selected
• Printer > General:
Publish Print Queue: Selected
Make sure that the E100 settings are configured as specified. Direct Mobile Printing will not
work if these settings are changed.
For more information about these settings, see Command WorkStation Help.
To Next Page
