SETUP OPTION REFERENCE 33
SETUP OPTION REFERENCE
This chapter describes the default settings that you can set for the following types of Setup
options:
• PS (PostScript) Setup and PCL Setup
• RIP While Receive
•SLP
•Job Log
Depending on the Setup method that you use (Configure or copier touch panel), not all
options are available. For more information about print options, see Printing.
For information about the Choose Server Language option, see page 39.
For setup options not listed this section, refer to Configure Help.
To determine the current Setup defaults, print the Server Configuration page from Command
WorkStation.
PS and PCL Setup options
• To access PS Setup options, choose Configure > PDL > PS.
• To access PCL Setup options, choose Configure > PDL > PCL.
Option Settings
(default is underlined)
Description
Allow Courier Substitution Yes
, No Specify whether to substitute Courier for fonts that are unavailable
when you download files to the E100, or when you print a document
for which you do not have the corresponding printer font. If this
option is set to No, jobs with fonts that are unavailable on the E100
hard disk generate a PostScript error and do not print. This setting does
not apply to PDF files; font substitution occurs automatically in PDF
files.
Append CR to LF Yes, No
Specify whether to append a carriage return to each line feed.
Brightness 100% Normal
, 85% lightest,
90% lighter, 95% light,
105% dark, 110% darker,
115% darkest
Choose the brightness for printed output.
Cache PDF and PS objects On, Off
Specify whether images in PDF and PS files are cached to reduce the
need to reprocess the same image in a file.
To Next Page
