ADMINISTERING THE FIERY CONTROLLER 41
TO SCHEDULE SYSTEM UPDATES
1 Access System Update.
You can access System Updates from a client computer using WebTools or Command
WorkStation.
NOTE: While updates are being installed, you cannot print to the E100. Schedule automatic
updates when no one plans to print. The E100 may also need to reboot several times during
the update process.
2 Select “Enable System Updates.”
3 Specify how often the E100 contacts the Update Server.
This feature sets a schedule for installing updates.
4 If you use a proxy server to connect through a firewall to the Update Server, click Proxy
Settings, select Enable Proxy, and type the appropriate information in the following fields:
• Address: proxy server IP address
• Port: port used by the proxy server
• User Name: user name for accessing the proxy server
• Password: password for accessing the proxy server
5 In the Proxy Settings window, click Save.
6 Click Apply.
From a client using Command WorkStation From a client using WebTools
• Start Command WorkStation.
• Log on as Administrator with the appropriate
password.
• Choose Configure > Server > System Update.
• Launch a Web browser and type the IP
address or DNS name of the E100 and press
Enter.
• Click the Configure tab, and click Launch
Configure.
• Log on as Administrator with the
appropriate password.
• Choose Configure > Server > System
Update.
To Next Page
