Fiio M11 - Using M11 as a Bluetooth Receiver

8
Note:
1. If you already connect with one Bluetooth device, it is necessary to disconnect the
Bluetooth connection in order to switch the Bluetooth audio code successfully before
reconnecting with the Bluetooth device. （The switching between the three mode of
LDAC can work in real time.)
2. When you turn on the Bluetooth, M11 will automatically connect to the latest
available device.
Using M11 as a Bluetooth receiver
When M11 is connected to the new Bluetooth device (such as the mobile phone) as
a Bluetooth receiver, turn on the "Bluetooth decoding mode" in the Bluetooth settings
interface, then the Bluetooth will turned off automatically, turn on the Bluetooth again
and you are in Bluetooth receive mode now.