25
icon to switch the equalizer.
2) Customize EQ: to customize an EQ setting as below:
a. Tap the button on the upper right to the right to activate the equalizer.
b. Choose the genre preset to be adjusted (e.g. “User Defined”);
c. Drag a vertical slider to adjust its corresponding frequency up and down. The EQ curve above
changes to reflect your adjustments.
Swipe left or right over the sliders to move between the low and high frequency sliders;
d. Press the Back button to the lower right to exit and save changes;
3) Reset EQ: Tap the reset button at the upper right corner to reset the present EQ preset to its genre
default.
Note: If a factory reset is performed on the M7, all EQ settings will be reset to defaults.
●M7 FAQ
1. Is the M7 running with Android? How can I navigate to previous page when there
is no virtual keys on the screen?
A: The M7 is running with a highly-
customized Android 7.0 system. You can always use the return button "<" at the upper left of the scr
een to navigate to previous page. And meanwhile the M7 supports gestures:
a) swipe up from the bottom-left area of the screen to return to previous menu;
b) swipe up from the bottom-right area of the screen to return to home menu.
2. How can I access the micro SD card after connecting the M7 to the computer?
A: M7 uses the MTP protocol and couldn't be properly recognized until the MTP driver installed.
Connect M7 to computer, open the disk named "FiiO MTP Driver"; Then, for Windows computers,
copy the "SAMSUNG_USB_Driver_for_Mobile_Phones_1590.exe" file in the folder "Windows" to
a local folder on the computer (such as the desktop) and double click to install it; For Mac computers,
install the driver stored under the folder "Mac\OS MTP Client". After that, you will be able to access
the storage or SD card of the M7.
3. What kind of Bluetooth codec does the M7 support? Why there's no change after changing
the codec setting?
A: The M7 supports the Bluetooth codec LDAC, atpX-HD, aptX and SBC.
You can change the default Bluetooth codec in Settings->Audio->Wireless playback quality. Also,
please note that the change of setting will not take effect until reconnecting the Bluetooth device.
If the Bluetooth headphones can not connect with the M7, please make sure that the Bluetooth
headphone is in pairing mode (just like the very first time that you use the Bluetooth headphone with
other devices). When the Bluetooth headphone is in pairing mode, turn on Bluetooth on the M7 and
search for the headphone to connect.
To Next Page
Loading...
