Need help?Do you have a question about the Fike CyberCat 1016 and is the answer not in the manual?
General| Zones | 16 |
|---|---|
| SLC Loops | 1 |
| Power Supply | 24 VDC |
| Enclosure Rating | NEMA 1 |
| Maximum Devices per Loop | 159 |
| Networking | Ethernet |
| Input Voltage | 120/240 VAC |
| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
| Humidity Range | 0 to 93% RH, non-condensing |
Highlights important safety warnings and cautions to prevent hazards to personnel and equipment.
Explains the CyberCat system's peer-to-peer architecture and intelligent device communication.
Explains access levels, user roles, and password requirements for system functions.
Overview of ECS functions including EVACS and Mass Notification System (MNS).
Details features like Alarm Verification, Pre-Alarm, Acclimate, and Summing for detectors.
Procedure for safely removing and replacing panel components or field devices.
Tools for diagnosing problems with addressable devices connected to SLCs.
Procedure for replacing the five replaceable fuses on the controller and SPS.
To Next Page
