Fike Quadnet - Fire Alarm Controls; System Controls Overview

Quadnet / Duonet Repeater Panel User Guide
8
Fire Alarm Controls
Note:
The Menus on repeater panels are exactly the same as the menus on control panels.
Controls sent from repeater panels are limited but all controls will still appear in the menu structure in
the repeater panel.
The greyed out controls below are not relevant to repeater panels and therefore should not be used.
The main Fire Alarm Controls may be enabled by turning the key switch to the controls enabled
position, or by entering a valid Access code.
System Controls
User
Supervisor
A context-driven highlighted-selection menu system is used to navigate the menu system,
automatically prompting you with the relevant options for your Access Level and system status.
The menus may be navigated in one of two ways as required:
1. Use the UP / DOWN keys to move the highlighted selection and press ENTER to select the
chosen one.
2. Enter the desired option number and press ENTER to select it.
Press the Esc key to exit to the previous menu.
fire alarm controls – turn key to enable controls
silence
alarms
reset
system
sound
alarms
enable controls
silence
buzzer
1. Delay On/Off
2. Test Display
3. View Logs
4. Disable/Enable
5. Set Time & Date
6. Test Modes
7. Day/Night Mode
8. Find Device
*
enter
1
o_o
>
<
<
<
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
9
WXYZ
0
___
#
ESC
1. Delay Override
2. Test Display