Need help?Do you have a question about the Filtec FT-100 and is the answer not in the manual?
General| Brand | Filtec |
|---|---|
| Model | FT-100 |
| Category | Security Sensors |
| Language | English |
Discusses cautions and warnings for safety issues.
Details safety mechanisms and procedures for X-ray radiation.
Illustrates the location of various safety labels on the FT-170/CI.
Shows radiation exposure profiles and schematics for the FT-170/CI.
Explains the details presented in the X-Radiation Output Certificate.
Details safety mechanisms and procedures for gamma radiation.
Shows radiation exposure profiles and schematics for the FT-100/CI.
Provides steps to identify whether the unit is FT-100/CI or FT-170/CI.
Defines the function of the FT-100/CI and FT-170/CI inspection systems.
Illustrates and labels the main components of the FT-100/CI and FT-170/CI.
Shows and labels the various optional flap inspection sensors.
Illustrates and explains the keys and functions of the control panel.
Explains the purpose of the signal beacon and how to stop it.
Describes the purpose and location of the reset switch.
Explains how to access menus and view information via the MASTER MENU.
Outlines the initial steps for starting a new production run or work shift.
Provides detailed steps for powering on and starting the inspection system.
Explains how to reset the inspection counters to zero.
Details the process of changing the case type configuration for inspection.
Explains how to select pre-programmed inspection routines for different case types.
Provides instructions on how to adjust the inspection beam height.
Guides on how to align and adjust the conveyor guide rails.
Instructions for adjusting the high flap sensor's position and height.
Instructions for positioning and adjusting side flap sensors.
Instructions for aiming and adjusting leading/trailing flap sensors.
Steps for calibrating and adjusting unslit flap sensors.
Explains how to access and interpret the reject history data.
Lists daily and weekly maintenance tasks to ensure peak performance.
Detailed steps for daily tasks like cleaning lenses and inspecting sensors.
Instructions for weekly tasks like cleaning housing and verifying beacons.
Steps to test the functionality of the FT-100/CI autoshutter.
Steps to verify the correct operation of the FT-170/CI auto enable/disable monitor.
Steps to verify the correct operation of the FT-170/CI X-ray on/off switch.
Provides steps to troubleshoot issues causing excessive or false rejects.
Lists and defines diagnostic messages that appear on the screen.
A list to record and reference case type numbers and descriptions.
Provides methods and contact information for submitting feedback.
To Next Page
