Filtec FT-170 User Manual

FT-100/CI and FT-170/CI
Operation Guide
Document 40275-0913

Filtec FT-170 Specifications

General

Brand	Filtec
Model	FT-170
Category	Security Sensors
Language	English

Summary

Safety Information

Safety Notices and Labels

Details safety notices, cautions, warnings, and labels on the equipment.

X-Ray Radiation Safety Information

Provides information on X-ray safety procedures and mechanisms of the FT-170/CI.

FT-170/CI X-Ray Radiation Safety Labels

Illustrates the location of various safety labels on the FT-170/CI system.

FT-170/CI X-Ray Radiation Exposure Profiles

Presents diagrams showing radiation exposure profiles for the FT-170/CI.

FT-170/CI X-Radiation Output Certificate

Displays a certificate detailing X-radiation output measurements for the FT-170/CI.

Gamma Radiation Safety Information

Covers safety procedures and characteristics related to gamma radiation from the FT-100/CI.

FT-100/CI Radiation Exposure Profiles

Components of the FT-100/CI and FT-170/CI

Operating the FT-100/CI and FT-170/CI

Operating Overview

Starting the FT-100/CI or FT-170/CI

Changing the Case Type

Selecting the Case Type

Adjusting Inspection Beam Height

Adjusting Guide Rails

Maintenance and Troubleshooting

Maintenance Checklist

Performing Daily Maintenance

Performing Weekly Maintenance

Verify FT-100/CI Autoshutter

Steps to test if the FT-100/CI autoshutter is working correctly.

Verify FT-170/CI Auto Enable/Disable Monitor

Procedure to confirm the correct operation of the FT-170/CI auto enable/disable monitor.

Verify FT-170/CI X-Ray On/Off Switch

Steps to check if the FT-170/CI manual X-ray on/off switch functions properly.

Troubleshoot Case Rejects

Provides steps to diagnose and correct frequent or incorrect case rejections.

Diagnostic Messages Reference

Defines common diagnostic messages for troubleshooting inspection problems.