Filtec FT-170 - Optional Flap Inspectors; Figure 2-3. Flap Inspectors Mounted on the Inspection Head

2-4 FT-100/CI and FT-170/CI Operation Guide
Document 40275-0913
2.3 Optional Flap Inspectors
2.3.1 Introduction
You can also install optional case flap inspection sensors on an
external bracket on the downstream side of the inspection head.
Figure 2-3
shows you what the flap inspection sensors look like.
2.3.2 Diagram
Use this diagram to learn what the various optional flap
inspectors look like.
Figure 2-3. Flap Inspectors Mounted on the Inspection Head
No. Description
1 Trailing flap inspector
2Leading flap inspector
3 Unslit flap inspectors or side flap inspectors
4 High flap inspector
5 Reference trigger
3
4
5
1
2