- 13 - English language
H-HS-HL GRAVITY
SLICERS
Cutting blade rotation speed
reduces and/or tends to stop
during operations.
Transmission unit fault.
Use the specific turnbuckle
(under the base, next to the
motor) to tension the belt. If the
problem persists, contact your
dealer or authorised service
centre.
Food product is not cut correctly
("torn" and/or irregular shape).
Cutting blade dull. Sharpen the blade
Cutting blade worn
Contact your dealer or
authorised service centre.
The cutting blade is not
correctly sharpened.
The sharpening disks are worn.
Replace the disks at the dealer
or at an authorised service
centre.
The carriage does not slide
evenly.
Guide lubrication insufficient Lubricate the carriage guide.
The stop button does not work. Electric drive circuit fault.
Disconnect the power cord from
the electrical socket and contact
your dealer or an authorised
service centre.
Table 2: Operating malfunctions
Problem Causes Solutions
To Next Page
Loading...
