- 24 - English language
HAND WHEEL
SLICERS
TROUBLESHOOTING
The purpose of the following information is to help the operator to identify and correct
any anomalies or malfunctions that may occur during use.
If one of the faults listed in the table occurs, inform the manufacture to actively contrib-
ute in developing new solutions and improving construction techniques.
Some faults may be resolved by the user, others require specific technical skills or abil-
ities and must only be performed by qualified personnel with recognised experience in
the specific sector.
Do not remove internal appliance parts.
The manufacturer is not liable for any machine tampering!
Table 2: Operating malfunctions
Problem Causes Solutions
Food product is not cut correctly
("torn" and/or irregular shape).
Cutting blade dull. Sharpen the blade
Cutting blade worn
Contact your dealer or
authorised service centre.
The cutting blade is not
correctly sharpened.
The sharpening disks are worn.
Replace the disks at the dealer
or at an authorised service
centre.
The carriage does not slide
evenly.
Guide lubrication insufficient Lubricate the carriage guide.
To Next Page
Loading...
