Original instructions
Via J.F. Kennedy - 20871 Vimercate (MB) Italy
Phone: +39 039 98981 - Fax: +39 039 6079334
www.fimer.com - info@fimer.com
INFOLINE: Tel.+39 039 6079326
WELDING TECHNICAL SERVICE
service.welding@fimer.com
BEFORE USING THIS EQUIPMENT IT IS RECOMMENDED TO READ THIS INSTRUCTION MANUAL!
IN CASE OF MISSING READING, CASES OF FAILURE AND/OR DANGERS FOR THE USER COULD
HAPPEN!
THE UNIT CAN ONLY BE USED BY PEOPLE WHO PERFECTLY KNOW THE SPECIFIC SECURITY RULES!
This manual is an integrant part of the equipment and it must be attached in every displacement or resale.
It is user’s responsibility to keep it intact and in good conditions.
The manufacturer has the right to apply modifies in every moment or without any forewarning.
Every Fimer product is minded, designed and produced in Italy in our sites.
This is guarantee of high quality and reliability.
Translation, production and adaptation rights, total or partial and with every mean (photostatic copies, film and microfilm
included) are reserved and banned without the written authorization of the manufacturer.
DEGREE OF 'WORK ENVIRONMENT POLLUTION: CLASS 3
To Next Page
Loading...
