Need help?Do you have a question about the Fimer TT205 AC/DC and is the answer not in the manual?
Formal statement confirming the product's compliance with relevant EU directives.
Breakdown of technical data presented on the TT165 AC/DC model's nameplate.
Physical and electrical characteristics of the welding machine.
Breakdown of technical data presented on the TT205 AC/DC model's nameplate.
Detailed technical specifications for the TT205 welding machine.
Explanation of hazard symbols and critical safety warnings for welder operation.
Guidelines for safe operation, installation environment, and handling hazards.
Precautions for gas cylinder handling, electrical safety, and maintenance.
Introduction to the welder's technology, capabilities, and materials it can weld.
Explanation of the front panel controls, buttons, and status indicator LEDs.
Details on indicators for welding parameters like slope, pulse, and current.
Instructions for connecting the welder to the appropriate power supply.
How to connect welding cables for MMA and TIG modes.
Procedure for connecting gas cylinder, regulator, and hose for TIG welding.
Detailed guide for performing MMA welding, including features and operational steps.
Explanation of DC welding modes (2T, 4T) and arc start methods (Lift/HF).
Details on timing sequences (Pre-Gas, Slope-Up, Slope-Down, Post-Gas) in DC welding.
Using 4T Bi-Level and pulsed modes for enhanced DC welding control.
Step-by-step instructions for performing DC TIG welding using the Lift-Arc method.
Guide to setting parameters like frequency, duty cycle, and current for DC welding.
Overview of AC TIG welding, including arc start methods and modes.
Explanation of timing sequences and 4-stroke modes for AC TIG welding.
Selecting between normal and pulsed welding processes for AC TIG.
Instructions for performing AC TIG welding using the Lift-Arc method.
Guide to setting parameters for AC TIG welding, including frequency and current.
How to connect remote controls for MMA and TIG welding operations.
List of common welding problems and their recommended solutions.
Schematic representation of the welder's main internal components.
Information on proper disposal of electrical and electronic equipment according to EU regulations.
General| Brand | Fimer |
|---|---|
| Model | TT205 AC/DC |
| Category | Welding System |
| Language | English |
To Next Page
