To Next Page
D
darrengonzalezAug 2, 2025
Why does my Fimer Welding System switch off and the display is off?
- NNicholas RodriguezAug 2, 2025
The most probable cause is a lack of tension on the supply grid. Refresh the power supply tension.
Why does my Fimer Welding System switch off and the display is off?
The most probable cause is a lack of tension on the supply grid. Refresh the power supply tension.
Symbols indicating danger, electric shock, fire, hot surfaces, hot slag, and general caution.
Symbols for reading the manual and general safety warnings.
Warnings for live parts, high voltage, explosion risk, and other specific hazards.
Guidelines for protective masks, clothing, ventilation, and eye protection.
Instructions on fire prevention, work area flooring, and surface safety.
Details on the graphic display, buttons, SD/USB ports, and adjustment switches.
Identification of various connectors like EUROCONNECTOR, inlet/outlet ports, and signal connectors.
Description of ON-OFF switches, air grills, and control unit lights.
Explanation of the manual short arc MIG welding procedure and settings.
Details on synergic MIG welding, material selection, and parameter adjustment.
Information on connecting and maintaining the MIG torch.
Instructions for connecting the torch using a traditional setup.
Instructions for connecting torches with spool or push-pull systems.
Description of the manual MMA welding procedure and parameters.
Explanation of the TIG welding process using the Lift-Arc method.
Information on the proper disposal of electrical and electronic equipment.
General| Brand | Fimer |
|---|---|
| Model | King 350 |
| Category | Welding System |
| Language | English |
