FIMI X8 Pro - Intelligent Low Battery Return

8
Intelligent Low Battery Return
When the intelligent flight battery of the drone is critically low and there is not
enough power for a return, the user should promptly land the drone. Otherwise,
if the battery is completely depleted, the drone will descend rapidly, leading to
potential damage or other hazards.To prevent unnecessary risks due to
insufficient battery power, the FIMI X8 Pro utilizes information such as flight
location, surrounding environment, and real-time wind speed to intelligently
determine if the current battery level is sufficient. If the battery level is only
enough to complete the return journey, Fimi Navi 3.0 will prompt the user
whether to initiate the return process. During the return process, pressing the
intelligent return button on the remote control can cancel the return.If the user
cancels the low battery return warning and continues flying, it may result in
insufficient battery power during the return process, leading to a forced landing
and potential loss or crash of the drone.
critical low battery
landing battery level
normal battery level
low battery
current battery levelRTH battery level
15%10%0% 30%
100%
• Inadequate positioning service (such as poor GNSS signal or GNSS failure) may result
in the inability to perform a normal return-to-home.
• Before takeoff, it is necessary to enter the safety settings interface of Fimi Navi 3.0 and
set an appropriate return-to-home altitude (default is 30m).
• During the return-to-home process, if the environmental conditions, such as low light,
do not meet the requirements of the visual system, the drone will be unable to avoid
obstacles.
• No-fly zones will affect automatic return-to-home and may result in the inability to
complete an automatic return-to-home. Please avoid flying near no-fly zones.
• Strong winds may prevent the drone from successfully returning home. Exercise caution
when flying in such conditions.
• Always be aware of small objects (such as tree branches or power lines) or transparent
objects (such as glass or water surfaces) along the return-to-home path.
• In case of an emergency, stop the return-to-home process and manually control the
drone.