19
Intelligent Battery
The FIMI X8 Pro intelligent flight battery has a rated voltage of 15.4V. This battery
model utilizes high-energy cells for a 40-minute flight time and incorporates
an advanced battery management system with charging and discharging
management functions.
• Push hard the battery, after the battery is installed in place, there will be a "click"
sound.
• To remove the battery, you need to press the battery buckle on both sides of the
battery to pull out the battery.
Assembly and Disassembly
Propellers
• Unfold the front and rear arms of the drone.
• Attach the gray marked propellers to the motor mounting base with gray marks on the arms.
• Rotate the propeller to the end of the lock direction until the propeller gets bounced and
locked.
• Press the propeller forcefully and rotate the propeller along the unlock direction to remove
the propeller.
• Please use the FIMI supplied propellers, do not mix different propeller models.
• Please check that the propeller is properly installed and tightened before each flight.
• If the propeller is broken, please replace it with a new one to ensure flight safety and efficiency.
• Do not get near the rotating propeller and electric motor to avoid cuts.
• Before each flight, please make sure the electric motor is firmly installed, without other
objects in the electric motor and can rotate freely.
• Do not touch the electric motor directly with your hands immediately after the electric motor
stops rotating, as this may cause burns.
• Do not block the electric motor ventilation slot.
• Make sure that the ESC beeps after the power is turned on.
Take the installation of reverse propeller as an example.
To Next Page
Loading...
