0.5-14 m
0.6-12 m
63° 63°
63° 63°
0.3-6 m
49°
49°
65°65°
Usage Scenarios
The positioning function of the downward vision system is suitable for
environments with no or poor GNSS signal and is automatically turned on in
normal or smooth mode. The forward and backward vision systems are
automatically turned on in normal or smooth mode ( need to select obstacle
avoidance behavior as go around or brake stop in FIMI Navi 3.0 App). The
forward and backward vision systems are suitable for well-lit environments,
and the texture of obstacles encountered in the flight path must not be
particularly sparse. In addition, due to inertia, the drone needs to be controlled
to brake within an effective distance.
Please make sure to pay attention to the flight environment. The vision system
and infrared sensing system only play a supplementary role under limited
conditions and cannot replace human judgment and control. Users should
always pay attention to the surrounding environment and FIMI Navi 3.0 related
warnings during the flight, maintain control of the drone and be responsible for
the control behavior. The user should be aware of the surroundings and FIMI
Navi 3.0 related warnings at all times during the flight, maintain control of the
drone and take responsibility for the control. When using the downsight vision
system in an open and flat field without GNSS, the optimal operating altitude
range of the vision positioning system is 0.5 - 8 m. When flying beyond this
range, the vision positioning performance may be degraded, so please fly
with caution.
The downward vision system may not work properly on the water surface.
Therefore, when the landing function is triggered, the drone may not be able
to actively avoid the lower water. Users are advised to maintain full control of
the flight and make reasonable judgments based on the surrounding environment
without over-relying on the vision system. The vision system cannot recognize
surfaces without textural features and cannot operate properly in environments
with insufficient or excessive light intensity.
The vision system does not work properly in the following scenes:
a) Solid-colored surfaces ( such as solid black, solid white, solid red, solid green).
b) Surfaces with strong reflections or reflections ( such as ice).
c) Surface of water or transparent objects.
17
To Next Page
Loading...
