c. Port assignment:
(i)
(ii)
Web Page Port: setup web page connecting port and video transmitting
port (Default: 80)
HTTP Port:setup HTTPS connecting port (Default:443)
d. UPnP (Universal Plug and play):
This IP camera supports UPnP, If this service is enabled on your
computer, the camera will automatically be detected and a new icon will be
added to “My Network Places.”
(i)
(ii)
UPnP Port Forwarding:
Enable UPnP Port Forwarding can access the Network Camera from
the Internet, select this option to allow the Network Camera to open
ports on the router automatically so that video streams can be sent out
from a LAN. There are three External port can be set, Web Port, Http
Port and RTSP port. To utilize of this feature, make sure that your router
supports UPnPTM and it is activated.
Note: UPnP must be enabled on your computer. Please follow the
procedure to activate UPnP.
• open the Control Panel from the Start Menu
• Select Add/Remove Programs
• Select Add/Remove Windows Components and open Networking
Services section
• Click Details and select UPnP to setup the service
• The IP device icon will be added to “MY Network Places”
• User may double click the IP device icon to access IE browser
To Next Page
Loading...