D. Event List
IP Camera provides multiple event settings.
1. Event Setting
a. Motion Detection
IP CAMERA allows 3 areas motion detection. When motion is triggered,
it can send video to some specific mail addresses, transmit the video to
remote ftp server, and save video to local SD card. To set up the motion
area, click “Area Setting”. Using mouse to drag and draw the area. The
same operation for area 2 and 3.
b. Rocord File: Choose AVI or JEPG file
c. Record Time Setting
Pre Alarm and Post Alarm setups for video start and end time when motion
To Next Page
Loading...