6
FINES – OPERATING INSTRUCTIONS – ENGLISH version
Prover HTB »HTB16,10-M in HTB16,10-D »
4.0. SAFETY NOTES
The appliance is designed exclusively for reheating and raising food, such as various confectionery,
bakery, meat and vegetable dishes!
Proverisstrictlymadeonlyforrisingfoodandnotanythingelseunlessmanufacturerconrms
otherwisewithwrittenconrmation!
Itisstrictlyforbiddentoriseanyproductscontaininginammablevapours(e.g.alcohol)thatcanset
onre!
The prover can be operated only by authorized persons who are familiar with all safety instructions!
When inserting and taking out the material from the prover wear protective gloves made of non-
combustible material!
For unauthorised persons movement near to the prover is strictly forbidden.
Before each start of the prover operation certain precautions should be secured
– All the safety elements of the prover are in place;
– No part of the prover is damaged;
– All foreign bodies from the prover and its surround ings are eliminated;
If these criteria are not met the prover should be started only after eliminating all the faults!
Afternishedrisingprocedurethemainswitchshouldbealwaysswitchedoandalsothewatervalve
should be closed.
Allmaintenanceandserviceworkshouldcarriedoutonlybyanauthorizedandaqualiedperson,
fami liar with the technical characteristics of the prover and regulations for the safe operation!
Always carry out repair and service work with the a ppliance at zero voltage!
After the maintainance or servis of the prover it s i necessary to take in consideration all upper
instructions.
Alsoitisnecessarytoshurethatallproverpartsandsecurityelementsareproperlyconguredand
installed on their places.
Iftheregulationsforsafeworkarenotsatised,theprovershouldn’tbeoperated!
5.0. PLACEMENT OF THE PROVER
Prover HTB-M, D can be used as a standalone deviceor you can use it to put the HTB or FIN DEKO
proveron it.
When installing the appliance for safety reasons, their own refrigeration servicing and general for reliable
operation,necessarytotakeintoaccountthestandarddeviationofthewalls,dierentpartitions,kitchenfurn
iture, decorative coverings, etc. ... All the walls and all the objec ts that are in the immediate vicinity must be
madeof noncombustible materials (ceramic, plating, etc. ...), otherwise they shall be surrounded with non-
combus tible heat insulating material.
In the area where the device operates normally, therefore, creates a moisture is necessary to
provide ventilation.