FingerTec TA100C User Manual

45
CONTENTS
1
3
2
4
WORk CODES
This terminal is providing work code feature.
The work code feature allows user to key in a
predefined number after fingerprint or pass-
word verification. User will key in a number
after fingerprint or password verification.
User will key in related work codes to show
purpose of their clocking data.
Table below is showing examples of work
code function predefined by number:
Reasons Work code
Check In 00
Check out 01
OT start 04
Done 05
Sick leave 10
Half day leave 12
Emergency leave 11
Meeting client 20
Outstation 21
These numbers are predefined by user in
the software and represent different reasons,
such as “10” for sick leave, “11” for emer-
gency leave.
TO DEFINE WORk CODE
Press once. Press
Ok
once.
Press to choose Work Code and Press once.
press
Ok
button.

FingerTec TA100C Specifications

General

Brand	FingerTec
Model	TA100C
Category	IP Access Controllers
Language	English