- 40 -
To Program Your SKY Remote For Your TV
1. Make sure your SKY box is connected to your TV
2. Turn your TV and SKY box on
3. Press TV on your SKY remote control handset
4. Hold down SELECT and the RED button together for about two seconds,
until the red light on the SKY remote blinks twice.
5. Key in 065 on your SKY remote. The light on the SKY remote should blink
twice
6. Press the STANDBY button on your SKY remote control. Your TV should
now switch off.
7. Press SELECT again. The light on your SKY remote control should now
blink twice
You should now be able to control some basic functions on your TV from your
SKY remote control (e.g. volume up/down, programme up/down).
To Next Page
Loading...
