Programming
MS-9050UD Series PN 52413:D 12/15/08 119
To select the type, press 1 while viewing the Primary Phone Line screen. The following screen
will be displayed:
Press 1 to select Touchtone dialing or 2 to select Rotary dialing.
3.6.9.2.3 Secondary Phone
Press 3 while viewing On Board DACT Screen #1 to program the type of secondary phone line
being connected to the DACT. The following screen will be displayed:
To select the type, press 1 while viewing the Secondary Phone Line screen. The following
screen will be displayed:
Press 1 to select Touchtone dialing or 2 to select Rotary dialing.
PHONE LINE
1=TOUCHTONE
2=ROTARY
Primary Phone Type Screen
ON BOARD DACT
1=ENABLED
2=PRIMARY PHONE
3=SECONDARY PHONE
On Board DACT Screen #1
ON BOARD DACT
SECONDARY PHONE LINE
1=TYPE TOUCHTONE
Secondary Phone Line Screen
PHONE LINE
1=TOUCHTONE
2=ROTARY
Secondary Phone Type Screen
To Next Page
Loading...
