Need help?Do you have a question about the Fire-Lite MS-9050UD and is the answer not in the manual?
General| Type | Addressable Fire Alarm Control Panel |
|---|---|
| NAC Circuits | 4 |
| Operating Voltage | 24V DC |
| Alarm Current | 1.5 A |
| Battery Charging Current | 1.0 A |
| Number of Notification Appliance Circuits | 4 |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Relative Humidity | 10% to 93% non-condensing |
| Power Supply | 120VAC, 60Hz |
| Dimensions | 3.5" D |
| Display | 80-character backlit LCD |
| Number of Zones | 50 addressable zones |
| Battery Backup | Two 12V, 7Ah batteries |
Disconnect all power sources (AC & DC) before servicing equipment to prevent damage.
Provides instructions for mounting the FACP backbox to the wall.
Details the process of mounting the chassis, transformer, and main circuit board into the backbox.
Covers AC power and earth ground connections, and battery power connections.
Explains the configuration and wiring of Notification Appliance Circuits (NACs).
Explains how to calculate the total system current draw for non-fire and fire alarm conditions.
Guides on calculating battery size based on standby and alarm load requirements.
To Next Page
