AC6102 Rev 03 8
1 Introduction
1.1 General
The A-C Fire Pump product line of horizontal split case
centrifugal fire pumps are the product of careful
engineering and skilled workmanship and, if properly
installed, maintained, and operated, should deliver
efficient and trouble-free service.
This manual introduces the user to the pump unit and its
intended uses. It is extremely important that the
instructions for operating the pump safely are read,
understood and followed prior to handling the pump.
These instructions do not consider local regulations. The
user alone is responsible for ensuring that such
regulations are observed, including by those who are
installing the pump unit.
CAUTION
Read this manual carefully before installing,
operating, using and maintaining the pump.
Improper use of the pump can cause
personal injury and damage to property, and
may void the warranty.
NOTICE
Save this manual for future reference, and
keep it readily available at the location of the
unit.
1.2 Target Group
This manual is intended for use by personnel with
qualified training and experience in the operation and
maintenance of pumps used for fire suppression.
1.3 Safety symbols used in this
manual
WARNING
If these safety instructions are not followed, it
could result in serious personal injury or death,
or property damage.
CAUTION
If these safety instructions are not followed, it
could result in equipment malfunction of
damage.
WARNING
Electric Shock Hazard, failure to follow safety
instructions could result in personal injury or
death.
WARNING
The surface of the pump may be so hot that it
may cause burns or personal injury.
NOTICE
Instructions that are not safety related but
pertain to the operation of the pump.
WARNING
The sound pressure is so high that hearing
protection must be used.
NOTICE
Read the installation, operation and
maintenance instructions.
1.4 Manufacturer
A-C Fire Pump Systems
8200 N. Austin Avenue
Morton Grove, Illinois 60053
USA
Tel.: +1-847-966-3700
Web: www.acfirepump.com
1.5 Additional technical documents
Order-related documents.
Operating and maintenance instructions, motor, (if
applicable).
Operating and maintenance instructions, engine, (if
applicable).
Supplier documentation, (coupling, etc.).
Documentation on accessories, (if applicable).
General dimensional drawing of the pump unit.
Performance curve of the pump.
2 Safety
2.1 General
This manual contains general installation, operating and
maintenance instructions that must be observed to ensure
safe pump operation and to prevent personal injury and
damage to property.
2.2 Intended Use
The standard horizontal split case pump is designed for
use in the fire suppression applications, with each pump
being designed according to customer requirements.
The pump must only be operated with the operating limits
described in this manual and other applicable documents
listed in section 1.5, Additional technical documents.
2.3 Improper Use
The operational safety of the pump unit can only be
guaranteed, if the pump is used in accordance with the
specifications in the sections of this manual. The
operational limits as stated on the pump unit’s nameplate
must never be exceeded.
To Next Page
Loading...