Fg. ˚C
Adj. (G7)
Adj. (G7)
Adj. (G7)
Adj. (G10)
Adj. (G10)
Adj. (G10)
Adj. (G10)
Adj. (G10)
Adj. (G10)
Dia. 18mm
Dia. 20mm
Dia. 23mm
T5 Part No. 7140
T3 Part No. 7139
The above performance figures are based on ideal laboratory test conditions. Air shutter settings above may need to be revised to take into consideration difference in resistances between
conventional and balanced flue installations, air temperature and Nozzle tolerance. Use flue gas analyzer to achieve optimum results.
Danfoss ES Nozzles are a kerosene n
ozzle have a tolerance of +- 5%. Danfoss S + H Nozzles are Diesel nozzles and have a tolerance of +- 15% when used with Kerosene.
Riello RDB 2.2 Range Burner Settings (K).
Variations in nozzle throughput, flue type & draught, oil viscosity etc. may give results differing from these
laboratory performance figures. These settings were carried out using a conventional flue.
KEROSENE SETTINGS FOR FIREBIRD C BOILER RANGE USING RDB 2.2 & 4.2 BURNERS
Override settings in burner manual.
The burner nozzle, pump pressure and air setting may have to be changed from the factory setting to suite sight conditions.