Fireboy- Xintex FBD-MZ

Need help?

Do you have a question about the Fireboy- Xintex FBD-MZ and is the answer not in the manual?

Summary

Specifications

System Specifications

Details operating voltage, current draw, temperature, dimensions, and relay output.

System Operation

Installation

Installing the Display

Instructions for mounting the display unit into a bulkhead, dash, or panel.

Installing Detectors and Devices

Guidance for placing heat/smoke detectors and other devices per manufacturer instructions.

Field Wiring Practices

Specifies cable types, routing, and connecting end-of-line resistors for detection circuits.

Electrical Connections Overview

Details connections for main input voltage and backup power to the control module.

Display and Notification Wiring

Connects the display to the control module and notification devices to alarm/fault relays.

Detector and Input Device Wiring

Explains how to connect detectors and input devices to zone terminals.

Zone Wiring Examples

Illustrates wiring configurations for single and multiple detectors on zones.

Component Wiring Examples

Shows wiring for detectors, pull stations, relays, and linear heat cables.

Control Module and Display Programming

Troubleshooting LEDs

Explains the function and color indication of control module LEDs for power, fault, and alarm.

Adjusting Display Brightness and Contrast

Guides users on adjusting display brightness and contrast settings via buttons.

Changing Number of Zones

Instructions to access the config menu and select the desired number of zones.

Configuring Zone Display

Details how to cycle zone options and exit settings menus after selection.

Enabling the Screensaver

Steps to access the config menu and toggle the screensaver feature ON or OFF.

Customizing Zone Text

Process for backing up, editing, and updating zone names via USB drive.

System Functions and Reset

Mute Functionality

Explains how to use a button to mute fault/alarm status and its effect on relays.

Resetting the System

Details how to reset the system after an alarm condition is resolved.

System Maintenance and Support

Testing Procedures

Procedures for testing devices, zones, and alarm relays, and the frequency of testing.

Routine Maintenance

Guidance on cleaning the display and detectors using appropriate methods.

Handling Alarms

Steps to investigate alarms, evacuate, account for personnel, and call emergency services.

Repair and Returns

Information on product repair, return authorization, and shipping instructions.

Warranty Information